Fujitsu PRIMERGY BX620 S5 Options Manual page 10

Structure of the server blade
1 I/O daughter card (Fibre Channel or Gigabit Ethernet daughter card),
optional
2 CPU 2 with heat sink
3 Slots for the CPU 2 memory modules
4 USB Flash Module (UFM)
5 Lithium battery (on the system board)
6 Trusted Platform Module (TPM)
7 Control panel board with foil cable
8 2.5-inch hard disk module 1 (SAS or SATA)
9 2.5-inch hard disk module 2 (SAS or SATA)
10 Storage module
11 Slots for the CPU 1 memory modules
12 CPU 1 with heat sink
13 DIP switch (on the system board)
I
The memory modules, the I/O daughter card and the storage module
must be installed in the server blade before it is placed in the basic unit.
DIP switch settings
The server blade comes with the DIP switches set in the following positions:
Switch Function
1 Delete password
2 Clear CMOS memory (NVRAM)
3 Restore system BIOS
4 Reserved
5 Reserved
6 Reserved
Table 1: Preset DIP switches
10 Options Guide
Introduction
Default
OFF
OFF
OFF
OFF
ON
ON
BX620 S5