Fujitsu PRIMERGY BX620 S5 Options Manual page 28

Installing a second processor
Figure 12: Fastening the processor heat sink
Ê Carefully place the heat sink onto the CPU.
Ê Fix the heat sink by fastening the four premounted screws in diagonally
opposite sequence.
V
CAUTION!
Never install a processor without a heat sink! The processor is likely
to overheat, which may cause damage to the processor and the
system board.
Ê Close the server blade, place it in the system unit and switch on the
server blade as described in the
28
chapter "Completion" on page
Options Guide
Processors
47.
BX620 S5