Turning The Appliance On - DeLonghi PAC C100 Operating Instructions Manual

Turning the appliance ON

• Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
TURNING THE APPLIANCE ON
Plug into the outlet.
Press the ON/STAND-BY button (17) (when turned on, the air conditioner starts operating
in the same mode as when it was turned off).
Press the MODE button (18) to select the required mode:
AIR CONDITIONING (COOL)
DEHUMIDIFYING (DRY)
FAN ONLY (FAN)
An arrow on the display indicates the selected mode.
AIR CONDITIONING MODE (COOL)
Ideal for hot humid weather when you need to cool and dehumidify the room.
In air conditioning mode, use the
The display shows the set temperature.
To change the fan speed, use the fan button "FAN" (16) on the remote control, choo-
sing from the available speeds:
AUTO: the appliance automatically selects the most suitable fan speed in relation to
the temperature set on the digital display and current room temperature.
HIGH: the air conditioner operates at maximum to reach the required temperature as
rapidly as possible.
MED: reduces noise levels while maintaining a comfortable temperature.
LOW: for silent operation and maximum energy efficiency.
Two arrows on the display indicate respectively air-conditioning "COOL" and the fan speed.
The most suitable temperature for the room during the summer varies from 24 to 27°C.
You are recommended, however, not to set a temperature much below the outdoor
temperature.
12
buttons to select the desired temperature.