Table of Contents
Advertisement
DESCRIPTION
1 Air outlet grille
2 Control panel
3 Castor wheels
4 Handles
5 Filter
6 Air intake grille
7 Air exhaust hose housing
8 Drainage hose with black cap
TO AVOID DAMAGE TO THE UNIT:
NEVER TRANSPORT OR TURN THE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS
OCCURS, WAIT 6 HOURS BEFORE TURNING THE APPLIANCE ON, 24 HOURS IS RECOM-
MENDED. After the unit has been on its side, oil needs to return to the compressor to
ensure proper function. Without allowing the unit this time (6-24 hours) the unit may
function for only a short time, and then the compressor will break down from lack of oil.
ELECTRICAL CONNECTIONS
Before plugging the appliance into the outlet, check that:
• The outlet's power supply corresponds to the value indicated on the rating label on
the back of the appliance;
• The outlet and electrical circuit are adequate for the appliance;
• The outlet is a 3-hole grounded outlet
another outlet.
Failure to follow these important safety instructions absolves the manufacturer of all lia-
bility.
If it becomes necessary, the power cable must be replaced by a qualified professional only
The instructions below will enable you to prepare your air conditioner for operation as
efficiently as possible. Before use, make sure the air intake and outlet grilles are unob-
structed.
Description
9 Power cable
10 Wall flange (only on some models)
11 Air exhaust hose
12 Window outlet
13 Castor locks (only on some models)
14 Remote control
15 Window bracket with locking pins
16 Strip gasket (only on some models)
. If this is not the case, you must choose
GB
5
Hide quick links:
Advertisement
Table of Contents
