Replacing The Presser Foot - Janome Memory Craft 15000 Instruction Manual

w
e
q
y
t
r
19

Replacing the Presser Foot

CAUTION:
Always make sure to press the lockout key to lock out
the machine.
Raise the needle by pressing the needle up/down button.
Press the lockout key.
q Lockout key
Raise the presser foot lifter.
w Presser foot lifter
Press the black lever on the backside of the foot holder.
The presser foot will snap off.
e Lever
CAUTION
To avoid damaging the lever, do not push it down.
Place the desired foot under the foot holder so that the
pin of the foot lies just under the groove of the foot holder.
Lower the presser foot lifter to lock the foot in place.
r Pin
t Groove
Each foot is marked with an identification letter.
y Identification letter