Roberts WM-202 Manual page 61

7. Rotate the Tuning/Select control to highlight the Frequency option for
the alarm then press the control if you wish to change it. The alarms
options are as follows:
Daily - the alarm will sound everyday
Once - the alarm will sound once
Weekdays - the alarm will sound on weekdays only
Weekends - the alarm will sound only at weekends
Rotate the Tuning/Select control to choose the required alarm
frequency option. Press the control to confi rm the selection.
8. Rotate the Tuning/Select control to highlight 'Enable:'. Press the
control to alternately switch between On and Off. Press the control
until 'Enable: On' shows on the display. Choosing Off will disable the
alarm.
9. The alarm can be set to buzzer, Internet radio, DAB+ radio or FM
radio. For whichever radio mode is selected, the radio alarm may be
set to any of the stations which have been stored as presets or to the
station most recently listened to.
Rotate the Tuning/Select control to highlight the current Mode option
for the alarm, then press the control if you wish to change it.
Rotate the Tuning/Select control to highlight either buzzer or the
required radio mode. Press the control to confi rm the selection.
10. If setting the alarm to a radio option, rotate the Tuning/Select control
to highlight the 'Preset:' option then press the control if you wish to
change it.
Choose from either the radio station 'Last listened' to, or from the
presets 1 - 5. Scroll to the chosen option and press the control to
confi rm the selection. Note that you can only set the alarm to use a
preset which has already been stored.
If you need any further advice, please call our Technical Helpline on 1300 556 816
Clock and Alarms
7-10
60