Installation; Kit Contents; Installing The Hp Tft7600 G2 Rackmount Keyboard Monitor Kvm Console - HP TFT7600 User Manual

Installation

Kit contents

Item
HP TFT7600 KVM Console
M6 screws
6-32 screws
HP Adjustable Toolless Rails
Cable management arm, power adapter with brace rail
Lock plates
USB cables
PS2 cables
Video cable
Power cords
USB cable labels
This kit might contain extra hardware.
Installing the HP TFT7600 G2 Rackmount Keyboard
Monitor KVM Console
Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap them into
1.
place.
Snap one end of the HP 1U Adjustable Toolless Rails into the retna rails.
a.
Extend the other half of the HP 1U Adjustable Toolless Rails to meet the appropriate rack depth,
b.
and snap them into place.
NOTE:
with the holes marked on the rack. The holes marked on the rack must be in the same location
for the front and rear of the rack.
If the HP 1U Adjustable Toolless Rails do not snap into place, be sure that they align
Quantity
1
4
5
2
1
2
2
2
1
2
2
Installation 8