Input Input 4.00 2.71 1.43 28÷30 mbar IH - IHF 4.00 1.50 28÷30 mbar IH2 - IHF2 This appliance is designed to operate with Butane at nominal pressure: 28 ÷ 30 mbar. For a regular gas combustion the required air quantity is: 8,4 m WARNINGS ALWAYS use heater in accordance with instructions.
Adequate ventilation must be provi- Room Size Size ded in rooms in which the heater is Control knob setting Aperture IH-IHF IH2-IHF2 used. This ensures removal of the Position products of combustion and allows small flame 15 m the entry of replacement air.
Page 5
OPERATING INSTRUCTIONS MODEL IH-IHF Lighting the heater 1. Turn on the gas at the gas bottle tap. 2. FROM « » POSITION, fully depress the control knob for 10 seconds and turn to (Small Flame) position. (If pilot flame does not ignite return to starting position and repeat).
VENTILATED RADIANT HEATER Electrical connection Before using the appliance check that your supply voltage is the same as that shown on the rating label of the unit. Connect your heater to earth provided socket only, having a capacity of at least 10/16 A. THIS APPLIANCE COMPLIES WITH THE EEC DIRECTIVE 89/336 CONCERNING ELECTROMAGNETIC COMPATIBILITY.
Replacement of the power cable must be carried out by qualified personnel. Always use original spare parts supplied by the manufacturer. The heater must not be located immediately below a fixed socket outlet. A safety device switches the fan heater off if it accidentally overheats. To reset the unit for normal operation, remove the plug from the mains socket for a few minutes, eliminate the cause of the overheating (e.g.