Table of Contents
Advertisement
Hardware installation
1.
Connect the power adapter to the Power socket on the back of the 4GM3W.
2.
Plug the power adapter into the wall socket and switch on the power.
3.
Wait approximately 60 seconds for the 4GM3W to power up.
Connecting via Ethernet cable
1.
Connect the yellow Ethernet cable provided to the port marked 'WAN/LAN' at the back of the 4GM3W.
2.
Connect the other end of the yellow Ethernet cable to your computer.
3.
Wait approximately 30 seconds for the connection to establish.
4.
Open your Web browser, and enter
5.
Follow the steps to set up your 4GM3W.
Connecting wirelessly
1.
Ensure Wi-Fi is enabled on your device (e.g. computer/laptop/smartphone).
2.
Scan for wireless networks in your area and connect to the network name that matches the Wireless network name
configured on the 4GM3W.
Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your 4GM3W
3.
When prompted for your wireless security settings, enter the Wireless security key configured on the 4GM3W. If you
have already configured your 4GM3W and changed the WiFi password, enter it here instead of the default password
provided on the wireless security card.
4.
Wait approximately 30 seconds for the connection to establish.
5.
Open your Web browser, and enter
6.
Follow the steps to set up your 4GM3W.
www.netcommwireless.com
http://192.168.20.1
into the address bar and press enter.
http://192.168.20.1
into the address bar and press Enter.
NetComm Wireless 4GM3W User Guide
12
Advertisement
Table of Contents
