Connecting To An Av Receiver Or Amplifier; Audio Signals That Can Be Output From This Unit's Hdmi; Out Terminal; Connecting The Fm Antenna - Pioneer X-SMC1-K Operating Instructions Manual

Connections

Connecting to an AV receiver or amplifier

This unit's rear panel
AS-BT200
Match the direction of
the plug to the
terminal and insert To HDMI input
straight. terminal
TV
AV receiver or
amplifier
To HDMI input
terminal
Audio signals that can be output from this
unit's HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
HDMI
OUT
ANTENNA
VIDEO DC IN
FM75
OUT 19 V
HDMI cable
(commercially
available)
From HDMI
output terminal
HDMI cable
(commercially
available)

Connecting the FM antenna

Connect the FM antenna plug onto the center pin of the FM
1
antenna socket.
FM wire antenna (supplied)
This unit's rear panel
Connecting optional Bluetooth ® adapter
(optional)
®
Connect the Bluetooth adapter (Pioneer Model No.
AS-BT200) to AS-BT200 terminal on the rear panel.
• Open the AS-BT200 terminal's cover and connect the
®
adapter with the label side facing to the right,
Bluetooth
then close the cover.
®
Bluetooth adapter
(commercially available)
Cover
This unit's
rear panel
ANTENNA
VIDEO DC IN
FM75
OUT 19 V
02
7
En