Connections; Connecting Antenna; Using External Antennas; Plugging In - Pioneer X-SMC22-S Operating Instructions Manual

03

Connections

Chapter 3:
Connections
CAUTION
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.

Connecting antenna

Connect the FM wire antenna as shown below. To improve
reception and sound quality, connect external antennas (see
Using external antennas below).
1 Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.

Using external antennas

To improve FM reception
Use a PAL connector (not supplied) to connect an external FM
antenna.
10
En
5 V
2.1 A
PHONES
AUDIO IN
1
ANTENNA
DC IN
18 V
One-touch PAL
5 V
2.1 A
connector
PHONES
AUDIO IN
ANTENNA
75 coaxial
cable
DC IN
18 V

Plugging in

After you've finished making all connections, plug the unit
into an AC outlet.
AC adapter
(Supplied)
To AC outlet
Power cord (Supplied)
1 Plug the supplied AC adapter into the DC
IN socket on the side of the unit.
2 Plug the supplied power cord into the AC
adapter then plug the other end into an AC
outlet.
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
• The cord length from the unit to the AC adaptor is 1.5 m
long. Make sure that you use the AC adaptor so that it is
not suspended in air.
In contact with the ground
1.5 m
Suspended off the ground
To AC outlet
To AC outlet