Download  Print this page

Pioneer X-SMC00 Operating Instructions Manual

Slim micro system
Hide thumbs


Slim Micro System
Discover the benefits of registering your product online at
Operating Instructions


Table of Contents

  Also See for Pioneer X-SMC00

  Related Manuals for Pioneer X-SMC00

  Summary of Contents for Pioneer X-SMC00

  • Page 1 X-SMC00 X-SMC00DAB X-SMC00DAB Slim Micro System Discover the benefits of registering your product online at (or Operating Instructions...
  • Page 2 CAUTION This product is for general household purposes. Any TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT failure due to use for other than household purposes REMOVE COVER (OR BACK). NO USER-SERVICEABLE (such as long-term use for business purposes in a PARTS INSIDE.
  • Page 3 When you find it heat may be generated which could lead to fire. damaged, ask your nearest PIONEER authorized service Furthermore, contact with the connected prongs center or your dealer for a replacement.
  • Page 4: Table Of Contents

    Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference.
  • Page 5: Before You Start

    Before you start Chapter 1: Before you start CAUTION What’s in the box • When inserting the batteries, make sure not to damage the springs on the battery’s  terminals. This can cause Please confirm that the following accessories are in the box batteries to leak or over heat.
  • Page 6: Using The Remote Control

    Before you start Using the remote control The remote has a range of about 7 m at an angle of about 30º from the remote sensor. 30° 30° Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit.
  • Page 7: Part Names And Functions

    Part names and functions Chapter 2: Part names and functions  STANDBY/ON Remote control Switches the receiver between standby and on (page 13). Input function buttons Use to select the input source to this receiver (pages 17, 18, STANDBY/ON OPEN/CLOSE 22, 24 and 28).
  • Page 8: Hang From The Wall To Use

    Part names and functions 11 Tuner control buttons Screw the wall hanging screws into the ST/MONO wall, putting them the specified attachment measurement (130 mm) apart. Use to switch the sound mode between stereo and monaural. (page 24) DAB SCAN Wall hanging screws (commercially available) Use to scan for DAB radio station (page 25).
  • Page 9: Front Panel

    Part names and functions Front panel 4 5 6 POWER ON TIMER PUSH OPEN AUDIO IN 10 11 Electric slide CD door Speaker Remote sensor iPod/iPhone terminal Receives the signals from the remote control. Use to connect your USB mass storage device or Apple iPod/ iPhone/iPad mini as an audio source (pages 17 and 22).
  • Page 10: Top Panel/Rear Panel

    Part names and functions Top panel/Rear panel      – STANDBY/ON INPUT   VOLUME X-SMC00DAB DC IN ANTENNA  STANDBY/ON button VOLUME –/+ Switches the receiver between standby and on (page 13). Use to set the listening volume (page 13). INPUT button Disc tray open/close button Selects the input source.
  • Page 11: Change The Interchangeable Panel

    Part names and functions Change the interchangeable panel (X-SMC00DAB-W do not have an interchangeable panel in the box) CAUTION • Exchange of the changeable panel should be performed on a stable surface. • Do not exchange the changeable panel while the unit is hanging from a wall.
  • Page 12: Connections

    Connections Chapter 3: Connections CAUTION Plugging in • Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing CAUTION connections. • Connect the power cord after all the connections • Do not use any power cord other than the one supplied between devices have been completed.
  • Page 13: Getting Started

    Press the  STANDBY/ON to enter the power stand-by mode. will change to different mode. Press the INPUT repeatedly to select desired function. Note X-SMC00 • In standby mode, if iPod/iPhone/iPad mini is connected, the unit turns charge mode. Setting the clock...
  • Page 14: Sound Controls

    Getting started Sound controls Setting the wake-up timer Used to change the existing timer setting, or to set a new Equalizer timer. When the EQUALIZER is pressed, the current mode setting Press  STANDBY/ON to turn the power on. will be displayed. To change to a different mode, press the EQUALIZER repeatedly until the desired sound mode Press and hold CLOCK/TIMER.
  • Page 15: Calling The Wake-Up Timer

    Getting started Calling the wake-up timer Using Headphones An existing timer setting can be reused. Connect the headphones plug to the PHONES terminal. Follow steps 1 to 3 in “Setting the wake-up When the headphones are connected, there is no sound timer”.
  • Page 16: Ipod/Iphone/Ipad Mini Playback

    Note Connect your iPod/iPhone. • Pioneer does not guarantee that this unit plays iPod/ iPhone/iPad mini models other than the ones specified. • Some functions may be restricted depending on the model or software version.
  • Page 17: Connecting Ipod/Iphone/Ipad Mini Using Supplied Iphone

    iPod/iPhone/iPad mini playback • When iPod/iPhone is not connected to the unit, close the iPod/iPhone connector port firmly. Playing iPod/iPhone/iPad mini Connect your iPod/iPhone/iPad mini. • If an iPod/iPhone/iPad mini is connected while the unit is turned on, playback of the iPod/iPhone/iPad mini will not begin.
  • Page 18: Disc Playback

    Disc playback Chapter 6: Disc playback This system can play back a standard CD, CD-R/RW in the CD CAUTION format and CD-R/RW with MP3 or WMA files, but cannot • Do not touch the lens. record on them. Some audio CD-R and CD-RW discs may not •...
  • Page 19: Advanced Cd Or Mp3/Wma Disc Playback

    Disc playback Repeat play Advanced CD or MP3/WMA disc Repeat play can play one track, all tracks or a programmed sequence continuously. playback To repeat one track: Press REPEAT repeatedly until “RPT ONE” appears. Press STANDBY/ON OPEN/CLOSE DISPLAY FOLDER TUNE+ ENTER.
  • Page 20: Programmed Play (Cd Or Mp3/Wma)

    Disc playback Programmed play (CD or MP3/WMA) About downloading MP3/WMA You can choose up to 32 selections for playback in the order There are many music sites on the internet that you can you like. download MP3/WMA music files. Follow the instructions from the website on how to download the music files.
  • Page 21: Specify The Folder To Play

    Disc playback Specify the folder to play Switch the display contents To specify the folder to play, perform the following steps. Press DISPLAY. If the title, artist and album name has been written to the file, STANDBY/ON OPEN/CLOSE that information will be displayed. (The unit can only display ...
  • Page 22: Usb Playback

    To repeat one track: • Pioneer does not guarantee that any file recorded on a Press REPEAT repeatedly until “RPT ONE” appears. Press USB storage device will play or that power will be ENTER.
  • Page 23: Specify The Folder To Play

    USB playback Specify the folder to play Playing in the desired order To specify the folder to play, perform the following steps. (Programmed Play) Press USB, and connect the USB storage device. The unit can play folders stored on a USB storage device in the desired order.
  • Page 24: Using The Tuner

    Using the tuner Chapter 8: Using the tuner Improving poor FM reception: Listening to the radio broadcasts Press ST/MONO repeatedly to select MONO. The following steps show you how to tune in to FM radio This will change the tuner from stereo to mono and usually broadcasts using the automatic (search) and manual (step) improve the reception.
  • Page 25: To Recall A Memorised Station

    Using the tuner To recall a memorised station Auto Scan Press PRESET +/– to select the desired DISPLAY TUNE+ FOLDER station. To scan the preset stations ENTER MEMORY The stations saved in the memory can be scanned MENU /PROGRAM automatically. (Preset memory scan) PRESET VOLUME TUNE–...
  • Page 26: Manual Tune

    Using the tuner Manual tune Memorising a station You can manually store stations which Auto Scan cannot You can store 10 DAB stations in memory and recall them at find. If reception is poor, you can adjust the sensitivity. the push of a button. (Preset tuning) Manual tune is only available after Auto tune.
  • Page 27: Dab Frequency Table (Band Iii)

    Using the tuner DAB Frequency table (BAND III) Frequency Label Frequency Label 174.928 MHz 208.064 MHz 176.640 MHz 209.936 MHz 178.352 MHz 211.648 MHz 180.064 MHz 213.360 MHz 181.936 MHz 215.072 MHz 183.648 MHz 216.928 MHz 185.360 MHz 218.640 MHz 187.072 MHz 220.352 MHz 188.928 MHz...
  • Page 28: Other Connections

    Other connections Chapter 9: Other connections CAUTION • Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. Connecting auxiliary components Connect the front panel AUDIO IN mini-plug jack to your auxiliary playback component.
  • Page 29: Additional Information

    If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
  • Page 30 Additional information When a USB storage device is connected Problem Check Remedy USB storage device is not Is the USB storage device properly Connect the device securely (all the way in). recognized. connected? Is the USB storage device connected This unit does not support USB hubs. Connect the USB storage via a USB hub? device directly.
  • Page 31: Playable Discs And Formats

    Additional information Playable discs and formats • Commercially available audio CDs Audio CD • CD-R/ -RW/ -ROM discs containing music recorded in the CD-DA format WMA files recorded on CD-R/ -RW/ -ROM discs or USB storage devices MP3 files recorded on CD-R/ -RW/ -ROM discs or USB storage devices •...
  • Page 32: Do Not Place Objects On This Unit

    • This unit’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer authorized service center. Although lens cleaners for players are commercially available, we advise against using them...
  • Page 33: About Ipod/Iphone

    Additional information About iPod/iPhone “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
  • Page 34: Specifications

    ........1 Warranty card Operating instructions (This document) Note • Specifications and the design are subject to possible modifications without notice, due to improvements. © 2013 PIONEER CORPORATION. All rights reserved.
  • Page 35 Additional information...
  • Page 36 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 K002_B3_En Printed in China <YOM200150-0009>...

This manual is also suitable for: