Tenda W300D User Manual page 31

Region selection: Country, City, Provider. If the city
or ISP is not listed in the drop-down menu, you can
enter the VPI and VCI value. "Encapsulation Mode",
"DSL Modulation" are suggested to select the default
value. If there is something wrong, you can inquire
your local ISP.
Other Settings:
MTU: Maximum Transmission Unit. The default value
is 1492. Don't modify the default value unless
necessary.
Service Name:
The current PPPoE connection name. Don't
modify the default value unless necessary.
Server Name:
The Server's name. Don't modify the default
value unless necessary.
Connect Automatically:
When
disconnected, it connects automatically.
Connect by manual:
When it is disconnected, connect again by
manual.
Connect on Demand:
When the data access the device, connect
automatically.
Connect on Fixed Time:
Connect to the Internet on fixed time.
W300D Wireless-N ADSL2+ Router
the device
26
is powered on or