Sony Cyber-shot DSC-TX10 User Manual page 267

Cyber-shot User Guide
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Troubleshooting > Warning indicators and messages > Self-diagnosis display
Self-diagnosis display
If a code starting with an alphabetic letter appears, the self-diagnosis function on the camera is
working. The last two digits (indicated by
camera.
If you cannot solve the problem even after trying the following corrective actions a few times, the
camera may need repair.
Contact your Sony dealer or local authorized Sony service facility.
C:32:
E:95: (DSC-TX100V)
There is trouble with the camera's hardware. Turn the power off and on again.
C:13:
The camera cannot read or write data on the memory card. Try turning off and on the camera
again, or taking out and inserting the memory card several times.
The internal memory has experienced a format error, or an unformatted memory card is
inserted. Format the internal memory or the memory card.
The inserted memory card cannot be used with the camera, or the data is damaged. Insert a
new memory card.
E:61:
E:62:
E:91:
A camera malfunction has occurred. Initialize the camera, then turn the power on again.
[Details]
E:94:
There is a malfunction when writing or deleting data. Repair is required. Contact your Sony
dealer or local authorized Sony service facility. Be prepared to give all numbers in the error
code beginning from the E.
Copyright 2011 Sony Corporation
267
) will differ depending on the state of the
[Details]
Print
Back to top