Sony Cyber-shot DSC-TX10 User Manual page 180

Cyber-shot User Guide
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
AF Illuminator
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The AF illuminator emits red light allowing the camera to focus easily when the shutter button is
pressed halfway, until the focus is locked. The
1. Set the camera to shooting mode.
2. MENU
(Settings)
Auto Uses the AF illuminator.
Off Does not use the AF illuminator.
Notes
Focus is achieved as long as the AF illuminator light reaches the subject, regardless of
whether light fails to reach the center of the subject.
You cannot use the AF illuminator in the following situations:
In REC mode
In Sweep Panorama mode
In Underwater iSweep Panorama mode (DSC-TX10)
When (Landscape),
mode is selected in Scene Selection.
When [Housing] is set to [On]. (DSC-TX10)
When [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People].
When you use the AF illuminator, the normal AF range finder frame is disabled and a new
AF range finder frame is displayed by a dotted line. AF operates with priority on subjects
located near the center of the frame.
The AF illuminator emits very bright light. Although there is no health hazard, do not look
directly into the AF illuminator emitter at close range.
Copyright 2011 Sony Corporation
180
Top page > Changing settings > Shooting Settings > AF Illuminator
indicator appears at this time.
(Shooting Settings)
(Twilight ), (Pet),
[AF Illuminator] desired mode
(Fireworks) or (Hi-Speed Shutter)
Print
Back to top