Table of Contents
Advertisement
Troubleshooting
Problem: Live View Does Not Display the Expected Video
Problem: Cannot Connect to a Device
66
Possible solutions:
•
Ensure that your web browser settings have been configured to allow ActiveX controls
(see
Step 2: Install the Honeywell IP Utility Software
setting up your browser).
•
Ensure that the network cable from the camera is connected to both the camera and
the network.
•
Ensure that the camera assembly board DIP switch settings are configured correctly.
When the following message
device connection is limited. Usually this warning indicates that your PC and the device
your are connecting to are on different subnets. Contact your network administrator for help
to resolve your network issue(s).
Figure A-1
Limited or No Connection Message
(Figure
A-1) displays in the status bar of the IP Utility, your
on page
34
for information on
Hide quick links:
Advertisement
Table of Contents
