Installing the Honeywell IP Utility and the
Web-Client Software
About the Honeywell IP Utility and Web-Client
About the Honeywell IP Utility
Document 800-07091 Rev A
07/10
This chapter describes how to:
•
Install and log onto the IP Utility
•
Connect to a device and configure network settings using the IP Utility
•
Launch the Web-Client software
•
Uninstall the IP Utility, Bonjour, or ActiveX software
The Honeywell IP Utility is a software application that is installed from a CD or
downloaded from the Honeywell Security Group website (go to
www.honeywellvideo.com/products/cameras/index.html
Mini-domes to find your camera, then download the latest software updates). It is installed
on a local workstation and primarily used by Administrators to configure the EQUIP Series
of products residing on an IP network.
The IP Utility enables users to:
•
Discover device(s) on a network
•
Configure the IP network settings, name device(s), upgrade firmware, change
passwords.
•
Open individual Web-Client applications for each discovered device.
3
and look under Indoor/Outdoor
31