LG LN830 Quick Reference Manual page 37

Navigation menu
Multistop planner
You can plan a route with up to 5 stops.
When you touch the "Go" button, the route is
calculated in each stage, from the departure
point to the first stop. When you reach the first
stop, the next route is calculated to the sec-
ond stop, and so on.
Setting stops along the route
1. From the "Select/Add Multistop Route"
screen, touch the "Add" button to add a
stop by Address, POI, My Favorites, or
Recent Locations.
2. Select one of these options, specify a
location, and touch the "OK" button.
(If you touch
steps 2-6 of "Address" on the page 19.)
3. The "Select/Add Multistop Route" screen
appears with the selected location.
Use the "Up" or "Down" buttons to change the
order of your itinerary.
: Use the "Edit" button to show or
delete a highlighted entry.
: Use the "Distance" button to organ-
ize your entries from closest to far-
thest distance from your current
location. (This is only available when
the stored route is more than four.)
Cancel route
If you no longer need to travel to your destina-
tion or if you want to change your destination.
Touch > >
, follow the
:
.
Route options
You can use Route options to determine what
road categories to avoid or allow and to set
the default route type when navigation calcu-
lates your selected destination.
1. Touch >
touch the desired items.
Avoid roads
Toll, Highway, and Ferry route sections are
avoided or allowed as determined by
whether they are selected, when navigator
calculates a route. You cannot allow or
avoid specific toll roads or ferry routes.
Route condition
Fastest: This option selects the route that
takes the least amount of time.
Fastest is the default value.
Shortest: This option selects the route that
is the shortest distance.
Remember, the shortest route
may not always be the quickest,
as you are able to travel faster on
some roads than on others.
2. Touch
.
Note
Route generation excludes any detours, stops
or delays along the route.
Taking a detour
If you need to take a detour when you are nav-
igating a route, touch
After you select a distance to take a detour,
touch
.
25
> . And then
> >
.