Coleman EVEN HEAT G52206 Assembly Manual page 10

ASSEMBLY INSTRUCTIONS
ELECTRONIC IGNITION: ELECTRODE ASSEMBLY
11
CH
CF
DD
C
Control panel, right side
CE1
D
CE1
E
CE3
CE1
F
TIP: The Electrode Set, main burner (CF)
and the Electrode wire, side burner
(DD), can be found attached to the
control panel (CH) heat shield, as
shown in figure C.
d. Insert the three Electrode set, main
burner (CF) wires into the Electronic
ignition assembly (CE1) as shown in
figure D.
NOTE: All main burner and side burner
CF
electrode wire connection points
are the same size.
e. Insert the Electrode wire, side burner
(DD) into the Electronic ignition
assembly (CE1), as shown in figure E.
DD
f. Insert the Instastart™ ignition button
(CE3) two wires into the Electronic
ignition assembly (CE1), as shown in
figure F.
16
ASSEMBLY INSTRUCTIONS
12
CI
A
CM
Front view
CM
CL
B
Back view
13
EL
A
EL
EF
B
EB
C
a. Assemble the heat shield (CM) to
the bottom of the front brace (CI) as
shown in figure A.
YOU WILL NEED:
9
X 2
b. Assemble the back of the heatshield
(CM) to the upper back panel (CL), as
shown in figure B.
YOU WILL NEED:
9
X 2
PROPANE MODEL ONLY
a. Assemble the wire shelf (EL) to the
bottom shelf (EF), as shown in figure
A.
YOU WILL NEED:
10 11 12
EF
X 2 X 2 X 2
b. Assemble the wire shelf (EL) to the
right cart side panel (EB), as shown in
figure C.
YOU WILL NEED:
10 11 12
X 2 X 2 X 2
17