Samsung SNP-6200RH User Manual page 90

setup screen
to make recording on the SD memory
1. Check the <total size> and the <free size>.
2. If the SD memory has a sufficient free space, set <record> to <on>.
Otherwise, check the stored data and if you find them not important, then click
<format> to format the SD memory.
If your SD memory card writes slowly, only one frame per second will be stored.
`
For a SD memory card with a large capacity, the formatting will be slowed down accordingly.
`
Setting to higher options of resolution, bit rate and frame rate increases the amount of data produced.
`
As the size of data grows, transferred video can be stored only at 1 fps even if you set the record
quality to full frames.
As some space of the SD memory card is reserved for the system, only about 90% of the total
`
capacity is available for use.
3. Specify the record conditions.
• Record profile : Display the number of profile to record.
• Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
• Pre-alarm duration : Set the image transfer time before the alarm. You can specify
up to 5 seconds before the occurrence of the alarm.
• Post-alarm duration : Set the image transfer time after the alarm. You can specify
up to 120 seconds after the occurrence of the alarm.
• Normal : This sets the option to always record the content regardless of the event.
- I-Frame : Records one image per second.
- Full : Records at the frame rate set in the record profile.
• Event : Set the recording type for a certain event that occurs.
<Event> recordings are not saved as <Normal>.
`
<Full> can be set when the <Normal> and <Event> recording resolution is 800x600 or less.
`
4. Specify the <activation time>.
• Always : This is always recorded to the SD memory card.
If set to Always, the activation time cannot be changed.
`
• Only scheduled time : This is recorded only during the specified time of the
specified day of the week.
• [
5. When done, click [apply (
90_ setup screen
] : The specified time is released.
)].