Option Menu; Input Guide; Osd Design; Osd Position - Panasonic PT-AE4000E Functional Instructions

OPTION menu

Remote control
See "Navigating through the MENU" on page 16.
See "Menu list" on page 17.

INPUT GUIDE

When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available. Press ◄ ► to
cycle through the options.
Options
Display the input method graphically.
DETAILED The INPUT GUIDE will disappear after 3
seconds without any operation.
Display the input method by text. The
SIMPLE INPUT GUIDE will disappear after 3
seconds without any operation.
OFF Turn off the guidance.

OSD DESIGN

You can change the background colour of the menu.
Press ◄ ► to cycle through the options.
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue

OSD POSITION

You can change the displaying position of the menu.
Press ◄ ► to cycle through the options.
UPPER UPPER
LEFT CENTRE
CENTRE
LOWER LOWER
LEFT CENTRE

BACK COLOUR

You can choose a screen colour from BLUE or BLACK
for when the projector is in idle. Press ◄ ► to select.
Control panel
Function
UPPER
RIGHT
LOWER
RIGHT

STARTUP LOGO

You can switch the logo on/off that is displayed when
starting up the projector. Press ◄ ► to select the
required option. STARTUP LOGO "Panasonic" will be
displayed for 15 seconds.
ON: Active
OFF: Deactive

AUTO SEARCH

When the projector is turned on, the input terminals are
detected and an input signal is selected automatically.
You can switch the system on/off. Press ◄ ► to cycle
through the options.
ON: Active
OFF: Deactive
NOTE:
• When no signal is detected, the last used input will be
selected.

HDMI SIGNAL LEVEL

When an HDMI IN is selected, you can switch the HDMI
signal NORMAL or EXPAND to display the image.
Press ◄ ► to select an option.
NORMAL For general HDMI equipment
EXPAND For HDMI equipment with expanded
signals.
NOTE:
• HDMI SIGNAL LEVEL
equipment.

FRAME RESPONSE

You can minimise the time delay of image displayed for
the progressive signals.
NORMAL
Prioritise the image quality
FAST Prioritise the frame response

INSTALLATION

When installing the projector, select the projection
method according to the projector position. Press ◄ ►
to cycle through the options. See "Projection method"
on page 5.
Setting on a desk/floor and
FRONT/DESK
projecting from front
Mounting on the ceiling and
FRONT/CEILING
projecting from front
Setting on a desk/floor and
REAR/DESK
projecting from rear
Mounting on the ceiling and
REAR/CEILING
projecting from rear
is not available with some
E
NGLISH - 39