Lens Control; Zoom/Focus; Lens Memory Load; Lens Memory Save - Panasonic PT-AE4000E Functional Instructions

LENS CONTROL

Remote control
See "Navigating through the MENU" on page 16.
See "Menu list" on page 17.
NOTE:
• The saved lens memory adjustment accuracy is not
guaranteed.
• If the memorised ZOOM/FOCUS adjustment is not
accurate enough, adjust the ZOOM/FOCUS menu
again.
• If the power supply is stopped while loading or saving
the lens memory, saved adjusted settings may differ
from the original after restarting the projector. Adjust
the ZOOM/FOCUS menu again.

ZOOM/FOCUS

You can use the 2 different test patterns to adjust the
focus and zoom of the image.
1. Press the ENTER button to display test pattern 1.
Press ▲ ▼ to adjust the focus and ◄ ► to adjust
the zoom.
PATTERN CHANGE
2. Press the ENTER button to display test pattern 2.
Press ▲ ▼ to adjust the focus and ◄ ► to adjust
the zoom.
PATTERN CHANGE
3. Press the ENTER button to display the projected
image.
You can confirm the adjustment is fit to the projected
image.
4. Press the MENU or RETURN button to return to
the previous menu, or press repeatedly to escape
the menu mode.
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the centre of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu. See "KEYSTONE" on
page 34.
Control panel
FOCUS
ZOOM
RETURN
FOCUS ZOOM
RETURN

LENS MEMORY LOAD

You can access the saved lens control settings (ZOOM/
FOCUS, H/V-AREA POSITION, and MASKING AREA)
instantly.
1. Select a setting from
2. Press the ENTER button to activate.
LENS MEMORY1
LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6
NOTE:
• The option that contains no saved adjustment will not
be displayed.
• If there is no saved setting, the
menu will not be selectable.

LENS MEMORY SAVE

You can save and name the adjusted lens control
settings in the LENS MEMORY.
LENS MEMORY1
LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6
Indicated with is in use, and
1. Adjust ZOOM/FOCUS, H/V-AREA POSITION and
MASKING AREA.
2. Select the LENS MEMORY SAVE and press the
ENTER button.
3. Select the required memory setting and press the
ENTER button.
4. The confirmation screen will be displayed. Select
OK and press the ENTER button.
5. Name the lens memory setting.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the ENTER button.
LENS MEMORY NAME INPUT
OK
LENS MEMORY 1 - 6.
LENS MEMORY LOAD
is empty.
ALL DELETE
CANCEL
E
NGLISH - 35