ProForm 831.28543.0 User Manual page 18

Note: If the resistance of the pedals and/or the
pace guide does not change when a "chirp" is
heard:
• Make sure that the iFIT.com indicator is lit.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
5
Monitor your progress with the display.
See step 4 on page 11.
6
Measure your heart rate if desired.
See step 5 on page 12.
7
Turn on the fan if desired.
See step 6 on page 12.
8
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 12.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the elliptical exerciser
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 16. In
addition, you must have an internet connection and an
internet service provider. A list of specific system
requirements is found on our Web site.
Follow the steps at the right to use a program from our
Web site.
1
Turn on the console.
See step 1 on page 11.
2
Select the iFIT.com mode.
See step 2 on page 17.
3
Go to your computer and start an internet
connection.
4
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
5
Follow the desired links on our Web site to
select a program.
Read and follow the on-line instructions for using
a program.
6
Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
7
Return to the elliptical exerciser and begin
pedaling.
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a preset program (see
steps 3 and 4 on page 13). However, an electronic
"chirping" sound will alert you when the resistance
of the pedals and/or the pace guide is about to
change.
8
Monitor your progress with the display.
See step 4 on page 11.
9
Measure your heart rate if desired.
See step 5 on page 12.
10
Turn on the fan if desired.
See step 6 on page 12.
11
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 12.
18