4, Winding The Bobbin - Pfaff 28 Instruction Book

4. Winding the Bobbin
All PEAFF 28 machines are equipped with a table winder which hos
proved very useful in all sewing shops.
As shown in photo 3, place spool 1 on pin 2, and the empty bobbin on
spindle 6. Pass the thread from spool 1 through the hole 3, between tenson
discs 4, over pin 5, and through the slot in the face of the bobbin. By press
ng down engaging lever 7, the bobbin winder pulley is pushed over against
the belt of the machine and the winder is engaged. Now start the machine.
When the bobbin is filled, the throw-off lever 8 will stop the bobbin winder
automatically.
The empty bobbin is taken out of the machine, the full bobbin removed
from the spindle and the thread torn off. Then the full bobbin is inserted
in the machine and the empty bobbin placed on the spindle for rewinding.
This way, a considerable time saving is effected since a full bobbin is at
hand at any time.
Also the operators of machines with disengageable balance whel will
profit from this ideal way of winding the bobbin,
I
Photo 3
4