Table of Contents
Advertisement
Connecting Devices to Your TV
Connecting a TV Antenna
You will need: a antenna/cable wire (not included).
1. Connect the Antenna wire to the input on the television.
2. Press the Source button to switch to TV mode.
3. Press the Setup button to access the setup menu.
4. Press the Arrow () buttons to highlight the CHANNEL icon. Press the Enter button.
5. Press the Arrow () buttons to highlight
Air/Cable. Press the Arrow () buttons
to select AIR.
6. Press the Arrow () buttons to highlight AUTO SCAN. Press the Enter button to begin scanning for
available channels.
Connecting Cable
You will need: a antenna/cable wire (not included).
1. Connect the Cable wire to the input on the television.
2. Press the Source button to switch to TV mode.
3. Press the Setup button to access the setup menu.
4. Press the Arrow () buttons to highlight the CHANNEL icon. Press the Enter button.
5. Press the Arrow () buttons to highlight
Air/Cable. Press the Arrow () buttons
to select CABLE.
6. Press the Arrow () buttons to highlight
Auto Scan. Press the Enter button to begin scanning for available channels.
Connecting HDMI
You will need: a device that supports HDMI and a HDMI cable (not included).
1. Connect the device's HDMI output to the HDMI input on the television.
2. Power the television on and press the Source button to switch to the connected input HDMI.
8
Advertisement
Table of Contents
