Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE WARNING: Shock hazard - Do Not Open. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR WARNING: To reduce the risk of fire or electric shock, do Mains Plug or Direct plug-in adapter is used as disconnect not expose this apparatus to rain or moisture.
Important Safety Instructions Read these Instructions. FCC Warnings Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the Heed all Warnings. user’s authority to operate the equipment. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Do not use this apparatus near water.
TE3213 Includes • Remote control: requires 2 AAA batteries (included) • Removable stand • Built-in AC power cord Setup Power Remote AC power: built-in AC power cable Requires 2 AAA batteries (included)
Introduction source Press and use volume Channel setup Power the Arrow/ Press to adjust Press to adjust Press to view Press to power enter buttons the volume. the television the television the television to adjust the channel. setup menu. off or on. source.
Page 7
source Power Press and use the Press to power the Arrow/enter buttons television off or on. to adjust the source. Number Keypad Aspect Press to adjust the Freeze aspect ratio between Press to freeze or WIDE, CINEMA, ZOOM, unfreeze the current and NORMAL.
Setup Connecting Basic Cable Connecting a Tv Antenna Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF 1. Connect a cable to the RF Input on the Input on the television. television.
Page 9
Channels Auto scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the source button to switch to TV mode. 2. Press the setup button to access the setup menu. 3.
Favorites and Clock Adding Favorites setting the Clock 1. Press the source button to switch to TV mode. 1. Press the setup button to access the setup menu. 2. Press the setup button to access the setup 2. Press the Arrow () buttons to highlight the menu.
TV Menu and Parental Controls Parental Controls (v-Chip) 1. Press the source button to switch to TV mode. 2. Press the setup button. 3. Press the Arrow () buttons, highlight LOCK, and press the enter button. 4. The default passcode for the parental lock is: 0 0 0 0 5.
Connecting Other Devices Connecting a set-Top Box or Gaming Device You will need: a set-top box, composite and RCA stereo cables or an HDMI cable (not included). 1. Connect the device’s audio and video outputs to the corresponding audio and video inputs on the television. 2.
Connecting Other Devices Connecting a Computer You will need: a PC with a VGA output, and a VGA cable (not included). 1. Connect the computer’s VGA output to the vGA/PC Input on the television. 2. Power the television on and press the source button to switch to the PC Mode.
Connecting a UsB Thumb Drive 1. Load a USB thumb drive into the UsB Port as shown in the image to the right. Using a UsB Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the source button to switch to Media mode.
Parts: partsinfo@dpiinc.com focused on the finer details that positively impact Phone support: 1-888-999-4215 the environment such as employing the usage of Website: www.gpx.com soy-based inks. Warranty DPI, Inc. also ensures that the factories that produce the company’s wide variety of consumer electronics...