Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE WARNING: Shock hazard - Do Not Open. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR WARNING: To reduce the risk of fire or electric shock, do Mains Plug or Direct plug-in adapter is used as disconnect not expose this apparatus to rain or moisture.
Important Safety Instructions Read these Instructions. FCC Warnings Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the Heed all Warnings. user’s authority to operate the equipment. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Do not use this apparatus near water.
Introduction Channel ± Setup Power Press to adjust Volume ± Source Press to access Press to turn the television Press to adjust Press to adjust the television the television channel. the volume. the source. menu. off and on. RCA Stereo RCA Stereo Component Composite...
Page 7
Power Source Press to power the television off Press to view the available or on. television sources. Press the ARROW and OK buttons to adjust FAVORITES Number Keypad the current television source. Display Favorites Press to view the on-screen Press to cycle through saved display.
Setup Connecting a TV Antenna Connecting Basic Cable Requires a TV antenna (not included). Requires a cable connection. 1. Connect a cable to the RF Input on the 1. Connect a VHF, UHF, or HDTV antenna to the RF Input on the television. television.
Favorites and Clock Adding Favorites Setting the Clock 1. Press the Source button to switch to TV mode. 1. Press the Setup button to access the setup menu. 2. Press the Setup button to access the setup menu. 2. Press the Arrow () buttons to highlight the SETUP icon.
Channels Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the Source button to switch to TV mode. 2. Press the Setup button to access the setup menu. 3.
TV Menu and Parental Controls Parental Controls (V-Chip) 1. Press the Source button to switch to TV mode. 2. Press the Setup button. 3. Press the Arrow () buttons, highlight PARENTAL CONTROL PICTURE, and press the Enter button. 4. The default passcode for the parental lock is: 0 0 0 0 5.
Connecting Other Devices Connecting a Set-Top Box You will need: a set-top box, composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable (not included). 1. Connect the set-top box’s audio and video outputs to the corresponding audio and video inputs on the television.
Connecting Other Devices Connecting a Computer You will need: a PC with a VGA output, and a VGA cable (not included). 1. Connect the computer’s VGA output to the VGA/PC Input on the television. 2. Power the television on and press the Source button to switch to the PC Mode.
Connecting a USB Thumb Drive 1. Load a USB thumb drive into the USB Port as shown in the image to the right. Using a USB Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the Source button to switch to Media mode.
Mounting Mounting the Television Please consult a professional before attempting to 200mm mount the television. Due to it’s large size, it is recommended to have two or more people when attempting to move or mount this unit. 200mm COMPONENT VIDEO IN Customer Support: 1-888-999-4215...
Email Parts: partsinfo@dpiinc.com focused on the finer details that positively impact Phone Support: 1-888-999-4215 the environment such as employing the usage of Website: www.gpx.com soy-based inks. Warranty DPI, Inc. also ensures that the factories that produce the company’s wide variety of consumer electronics...