Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE PRÉCAUTION: Danger d’explosion si les piles sont remplacées BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent. WARNING: To reduce the risk of fire or electric shock, do WARNING: Shock hazard - Do Not Open.
Important Safety Instructions Read these Instructions. FCC Warnings Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the Heed all Warnings. user’s authority to operate the equipment. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Do not use this apparatus near water.
Introduction Source Press and use Volume Channel Setup Power the Arrow/ Press to adjust Press to adjust Press to view Press to power Enter buttons the volume. the television the television the television to adjust the channel. setup menu. off or on. source.
Page 7
Source Power Press and use the Press to power the Arrow/Enter buttons television off or on. to adjust the source. Number Keypad Aspect Press to adjust the Freeze aspect ratio between Press to freeze or WIDE, CINEMA, ZOOM, unfreeze the current and NORMAL.
Setup Connecting Basic Cable Connecting a TV Antenna Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF 1. Connect a cable to the RF Input on the Input on the television. television.
Favorites and Clock Setting the Clock Adding Favorites 1. Press the Setup button to access the setup 1. Press the Source button to switch to TV mode. menu. 2. Press the Setup button to access the setup 2. Press the Arrow () buttons to highlight the menu.
Channels Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the Source button to switch to TV mode. 2. Press the Setup button to access the setup menu. 3.
Parental Controls Parental Controls (V-Chip) 1. Press the Source button to switch to TV mode. 2. Press the Setup button. 3. Press the Arrow () buttons, highlight the PARENTAL CONTROL picture, and press the Enter button. 4. The default passcode for the parental lock is: 0 0 0 0 5.
Connecting Other Devices Connecting a Set-Top Box You will need: a set-top box, composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable (not included). AUDIO DC IN 12V VGA/PC IN VIDEO HDMI 1. Connect the set-top box’s audio and AUDIO ANTENNA video outputs to the corresponding audio...
Connecting Other Devices Connecting a Computer You will need: a PC with a VGA output, and a VGA cable (not included). AUDIO VGA/PC IN VIDEO HDMI AUDIO ANTENNA 1. Connect the computer’s VGA output to the VGA/PC Input on the television. 2.
Connecting a USB Thumb Drive 1. Load a USB thumb drive into the USB Port as shown in the image to the right. Using a USB Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the Source button to switch to USB mode. 3.
Mounting to a Wall Important Notes We recommend having this television professionally mounted. 3.93” (100 mm) 3.93” (100 mm) VIDEO AUDIO HDMI DC IN 12V VGA/PC IN AUDIO ANTENNA INPUT INPUT Customer Support: 1-888-999-4215...
To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at www.gpx.com. Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en...