Lock Code; Pin Codes; Puk Codes; Barring Password - Nokia 5320 User Manual

Y o u r d e v i c e

Lock code

The lock code (5 digits) helps to lock your device. The preset
code is 12345. Change the code, and set the device to
request the code.
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.

PIN codes

The personal identification number (PIN) code or the
universal personal identification number (UPIN) code (4 to
8 digits) help to protect your SIM card. The (U)PIN code is
usually supplied with the SIM card. Set the device to
request the code each time the device is switched on.
The PIN2 code may be supplied with the SIM card and is
required for some functions.
The module PIN is required to access the information in the
security module. The signing PIN is required for the digital
signature. The module PIN and the signing PIN are supplied
with the SIM card if the SIM card has a security module in
it.
18
Copyright © 2008 Nokia. All rights reserved.

PUK codes

The personal unblocking key (PUK) code or the universal
personal unblocking key (UPUK) code (8 digits) are required
to change a blocked PIN code and UPIN code, respectively.
The PUK2 code is required to change a blocked PIN2 code.
If needed, contact your local service provider for the codes.

Barring password

The barring password (4 digits) is required when using call
barring. You can obtain the password from your service
provider. If the password is blocked, contact your service
provider.

Remote lock

You can lock your device and memory card remotely using
a text message. To enable remote locking and to define the
text message content to be used, select
Phone sett. > General > Security > Phone and SIM
card > Remote phone locking > Enabled. Enter the text
message content (5 to 20 characters), verify it, and enter
the lock code.
> Settings >