Advertisement
Amplifi er assembly replacement continued:
8 8
Place the new amplifi er assembly
(part #0013839-00) where the old one
was. Follow the same steps as above,
but backwards 7 to 1. Remove the
serial number from the faulty amplifi er
assembly (as shown in picture above)
and place on the new amplifi er
assembly. Power up the SA1530z and
relish in the fact that you just replaced
an amplifi er assembly. Hats off to you for
a job well done!
9 9
Important:
assembly must be returned to LOUD
Technologies. The address should
be on the return shipping label that
was provided with the new amplifi er
assembly. If not, the return address is at
the top of this page. Also, please write
the order number and service request
number (ex: 1046256-1203935) in big,
black, bold numbers on the outside of
the box. This helps expedite the return.
The faulty amplifi er
16
Advertisement
