Advertisement
Amplifi er assembly replacement continued:
1 1
1 1
6 6
Closeups of the led PCB cable and
connector are shown above. The black
wire of the cable is closest to the ribbon
cable. The cable only fi ts in one way.
Edge of
Edge of
amplifi er
amplifi er
assembly
assembly
2 2
3 3
4 4
Edge of
Edge of
amplifi er
amplifi er
assembly
assembly
2 2
3 3
7 7
Now for the closeups of the driver
terminals. Make sure the cables are
reconnected to the same terminals they
were removed from (but on the new
amplifi er assembly). Once again, they
are: (2) solid yellow, (3) yellow and black,
(4) blue and black, (5) solid blue,
(6) green and black, and (7) solid
green. Do not force cable removal
or connection, although needle-nose
pliers may aid in loosening the crimped
cables.
5 5
6 6 7 7
4 4
5 5
6 6 7 7
15
Advertisement
