Table of Contents
Advertisement
6. Using Shift Levels
6.1 PLU/Department Shift
The PLU/department shift is a preset function to switch all article- and department keys to a
second level. This is done by adding a pre-programmed offset to the actual PLU or department
number. Please note that the shift is valid for the very next item, it will be automatically reset
after entry. It is also possible to block the shift for either PLU's or departments.
6.2 Price Shift
The QTouch 15 allows for more than one sales price for each PLU. This is a useful function for
special occasions, such as Happy Hour or item promotions. You may program an automatic price
shift based on a time period or manually change the price shift via key entry.
First select the price level by pressing the corresponding key. Then, enter the PLU. Depending on
the programming the price level will be reset automatically after an item, a transaction or not at all.
In that case you must reset the price level manually by choosing another keyboard level.
By using price levels it is also possible to realize tax shifts. In such a case the second price level
has the same price but a different tax rate.
Example: Shift to price level 2 and register PLU 1:
Price
1
level 2
6.3 Tax Shift
As an alternative to the tax shift via price levels, there is a preset function to activate or deactivate
certain tax rates directly.
Just press the corresponding "Tax" key to activate or deactivate a certain tax rate.
Depending on the programming the tax shift will be reset
automatically after an item, a transaction, or not at all. In
that case you must reset the tax manually by pressing the
respective tax key again.
Example: Shift to tax 3 and register PLU 1:
Tax
1
shift 3
PLU
PLU
20
CUSTOMER LOGO
1 PLU 1
---------------------------
1 Total
Tax 3
Cash
10,00
10,00
1,00
10,00
Hide quick links:
Advertisement
Table of Contents
