Turning The System On - 2N NetSpeaker Quick Start Manual

1.1 Turning the system ON

In this section we provide you with the steps how to turn ON the system installed in
the presentation case. Please follow the steps bellow.
1. After opening the case, you will find 2N
the field. On the left side you can see the speaker build in the case. On the
upper right side you can locate the PoE injector to provide the power supply for
NetSpeaker over Ethernet. In the lower right side there is a space to pack the
connecting cables (230V AC power supply, CAT5 RJ 45 Ethernet cable). See
picture 1.1.
2. Pull out the connecting cables and connect the power supply cable to the power
outlet.
a. Net Speaker unit turns ON, you can see blue/green light is shining in the
front panel of Net Speaker.
b. The default settings of the unit are:
i. STATIC IP settings: IP – 192.168.1.100
®
Net Speaker device in the middle of
MASK: 255.255.255.