How To View The; Emperature In Filling Ank Mode Or In; Pre Operate Mode; How To View The Ro Permeate - Millipore DIRECT-Q 3 SYSTEM User Manual

5-4 H
OW TO VIEW THE
F
IN ILLING
Press:
NOTE: The Product resistivity and temperature are displayed automatically during DISPENSING
mode or during RECIRCULATION.
5-5 H
OW TO VIEW THE
T
ANK MODE OR IN
Press:
NOTE: The units are displayed in μS/cm only.
P
RODUCT
T
ANK MODE OR IN
The Display will show the last Product resistivity and temperature
values measured
RECIRCULATION. The values are displayed for 5 seconds.
RO P
ERMEATE
P O
RE PERATE MODE
The Display will show the RO Permeate Water conductivity value
that was measured during Filling Tank mode. The displayed value is
not a real-time value. It is the last permeate conductivity value
memorized after the system was in Dispensing Mode. The value is
displayed for 5 seconds.
U
SING THE
R
ESISTIVITY AND
P O
RE PERATE MODE
during DISPENSING
C
ONDUCTIVITY IN
- 33 -
D -Q
IRECT
T
EMPERATURE
mode or during
F
ILLING