Setting The Camera's Channel - First Alert A-550 User Manual

Setting Up Your A-550 System
Model A-550 User's Manual
S C
ETTING THE AMERA
The A-550 wireless camera has four selectable channels to avoid any interference from any
other wireless devices. Follow the steps below to set or change the frequency channel of
the camera. If you are adding another camera to an existing system, make sure its channel
is different from the channel of the existing camera.
1
Pull open the rubber flap on the camera's power cable.
2
Locate the two dip switches under the rubber flap.
3
Use the dip switch tool to flip the switches to change the camera's transmitting
channel.
4
Set the camera channel using the switch configuration below. Do not set more than
one camera on the same channel or interference will appear on the screen.
Note: It is possible to link four wireless cameras to a receiver. However, you may need to
adjust the orientation of the antenna on the receiver for the channel being viewed.
' C
S HANNEL
6