Installing Cameras; Installation; Camera Pairing - First Alert DWH-400 User Manual

INSTALLING CAMERAS

1. Select the position for the camera and secure the camera stand.
(Screws and anchors are supplied. Use an appropriate screw type
for the mounting surface.)
2. Screw the camera onto the bracket.

CAMERA PAIRING

Pairing Timer
Your camera is paired to the monitor at the factory to channel 1.
To add new camera(s) to your system, you have to pair it to the different channel(s).
Tap the camera number you want to pair. A processing icon displays for a 60 second countdown. Press
the Pairing Key button on Camera power cord. The Pairing LED
on camera will blink once then will begin blinking continuously
indicating data transmission is in process.
System will confirm pairing process is successful when pairing is
complete. The system will turn the camera on automatically. The
system will indicate pairing process failed with "X" displaying on
screen.
Tap the Home icon
3. Adjust camera to the proper view angle Make
sure the lens is upright relative to your subject.
Tighten the thumb bolt.
4. Screw the antenna into place on the rear of
the camera. Adjust the antenna to an upright
position.
5. Connect the power cable to the DC IN of the
camera.
6. Plug the power supply into the electrical outlet.
7. Once the camera is connected, see Camera
Setup, Camera Pairing to link the camera(s) to
the receiver.
to return to Live View Screen.

INSTALLATION

MOUNTING & PAIRING
Camera Orientation
It's important the camera is mounted correctly
to ensure the image is not upside down as the
camera lens can only be positioned one way.
Pairing Failed
Page 5
3
Pairing Key