Installing Camera; Battery Replacement - Instructions For Use - First Alert BRK PRO-DC3 User Manual

Installing camera

Step 1: Select the position for the camera and drill holes for the anchors using the paper template
provided. (Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.)
Step 2: Install batteries according to "+ /- polarity marker". Insert the two AA batteries into the battery
compartment.
Step 3: Do not tighten screws completely so you can attach the camera base through the keyhole slots.
Fit camera body keyhole slots to the screws. Slide camera onto screws and rotate camera to lock into
keyhole slots. Note: If camera is loose, adjust depth of screws until camera fits snugly.
Step 4: Decoy camera toggles On/Off by pressing down on the dome. You may need to activate the
decoy camera after installing the batteries.
Install Camera
Mounting Keyhole Slots
on bottom of alarm

Battery Replacement - Instructions for Use

Always purchase the correct size and grade of battery most suitable for in-
tended use. Replace all batteries of a set at the same time. Clean the battery
contacts and also those of the device prior to battery installation. Ensure
the batteries are installed correctly with regard to polarity (+ and -). Remove
batteries from equipment that is not to be used for an extended period of
time. Remove used batteries promptly.
product overview
Page 5
Installation