DeLonghi EC 200.CD User Manual page 14

GB OK 27-09-2002 8:13
PROBLEM
• The control button functions
are not active
• After filling the water tank,
the appliance continues to
indicate the absence of
water (indicator 30 flashes)
• When the knob (18) is rota-
ted, water is not delivered
Pagina 31
CAUSE
• Coffee grounds container (10)
full. Indicator 29 flashes
• Coffee grounds container (1)
absent or incorrectly inserted
(indicator 29 is lit)
• The boiler temperature is too
high (indicator 28 flashes
rapidly)
• The boiler temperature is too
low (indicator 28 flashes slowly)
• The appliance is in steam posi-
tion (indicator 35 is lit)
• The spout assembly is jammed
(indicator 26 flashes)
• The appliance must be reset
manually
• The steam spout (15) is clogged
31
USER MANUAL
REMEDY
• Empty the container (10) with
the appliance turned on
• Insert the container (10)
• Place a container under the
spout (15) and turn the knob
(18) to run off the water until
the indicator 28 stops flashing
and remains steadily lit.
• Wait for a moment. Indicator
28 no longer flashes but
remains steadily lit.
• If you do not wish to use the
steam function, press the steam
button 36 to return to the coffee
function.
• Manually clean the spout
assembly as described in point
9.4
• Press the coffee delivery button
(38). If after a couple of
attempts the appliance conti-
nues to indicate the absence of
water, run off water from the
spout as described in para-
graph 7
• Clean the steam spout (15) and
cappuccino maker (16).
GB