DeLonghi EC 200.CD User Manual page 10

GB OK 27-09-2002 8:13
9.4 Manual cleaning of the spout assembly
The spout assembly must be cleaned at least once a week or, preferably, whenever you fill the coffee bean
container.
Proceed as follows:
• Turn off the appliance using the ON/OFF but-
ton (24).
A. Lower the spout (14) and open the service
door (8).
B. Raise the red safety lever X until it stops.
Press the red safety button Y on the left and
hold it down. At the same time, lower the red
lock button Z and remove the spout assembly.
C. Insert the knob (20) into the hole on the right
of the red mount, making sure the knob guide
is inserted in the respective housing in the
spout assembly. Rotate clockwise until it stops.
The spout assembly unit opens and the two fil-
ters are accessible.
D. Clean all coffee residues from the sspout
assembly and the filters in particular under
running water. When this has been done,
rotate the knob anticlockwise until it stops to
close the spout assembly.
E. After washing and drying thoroughly, reposi-
tion the spout assembly by inserting it into the
guide K (metal rod) and making sure it fits
onto the rail W on the right. Then, holding the
red button Z on the spout assembly down,
push the unit until it hooks into place. Release
the lock button Z (if working correctly, the button clicks into place automatically). Lower the red safety
lever on the right X until it stops.
F. Close the service door (8) by pressing with the thumb until you hear it click into place.
If the service door is not well closed, the appliance will not come on.
• Turn the appliance on. The spout assembly automatically returns to the basic position.
At the end of the heating cycle, the appliance is again ready for use.
N.B: Although apparently complex, this operation is quick to learn and enables you to keep the
appliance perfectly clean and hygienic.
Pagina 27
USER MANUAL
2
1
B
A
C D
W
K
E
F
CLEANING AND MAINTENANCE
27
GB
Z
X
Y