Setting Up Your System - Bose SoundDock 10 Bluetooth Owner's Manual

TAB 8, 16 TAB 7, 15
®
S D 10 B
OUND OCK LUETOOTH

Setting up your system

1. Place your SoundDock 10 Bluetooth digital music
system on a flat, stable surface.
2. Plug the small end of the AC power cord into the AC
power connector on the back of the unit.
3. Plug the other end into a live AC (mains) outlet.
After you hear two short tones from your
SoundDock 10 Bluetooth system, it is ready to use.
AC IN
Note:
The tonal quality of your SoundDock 10 Bluetooth system
will vary with placement. For example, moving the system toward
a corner will increase bass response; moving it away from the
corner will decrease bass response.
2
TAB 6, 14 TAB 5, 13
®
D M S
IGITAL USIC YSTEM
TAB 4, 12 TAB 3, 11
CAUTION: Do not cover the ventilation openings of the
product. The slots on the top provide ventilation for the
built-in electronic circuitry and shall not be blocked.
Note:
When handling the SoundDock 10 Bluetooth system,
the front structure containing the dock for iPod/iPhone may feel
loose. This is normal. This part of the system is intentionally
designed to prevent speaker vibration from interfering with the
operation of your iPod/iPhone.
System on/off control
You can turn on your SoundDock 10 Bluetooth system in
any of the following three ways:
• Dock a device.
• Press any key except OFF on the Bose
• Press any key on the docked device.
To turn off the SoundDock 10 Bluetooth system, do
either one of the following:
• Press OFF on the SoundDock 10 Bluetooth remote.
• Remove the docked device.
TAB 2, 10 English
®
remote.