Part Names And Functions; Front/Top - Epson EB-Z8000WU User Manual

Part Names and Functions

Front/Top

The illustration shows a standard zoom lens installed.
Name
A
Use these handles when carrying the projector. Also,
Handle
you can pass an anti-theft wire lock through the handles
to secure the projector. s
Function
p.38
Caution
Do not carry the projector by one person.
Two people are needed to unpack or carry the pro-
jector.
Name
B
The Security slot is compatible with the Microsaver
Security slot( )
Security System manufactured by Kensington.
p.38
s
C
Takes in air to cool the projector internally. If dust
Air intake vent
collects here it can cause the internal temperature to
(Air filter)
rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air filter regularly. s p.70,
D
When set up on a desk, turn to extend and retract to
Front adjustable foot
adjust the horizontal tilt.
The front adjustable feet can be removed when the
projector is mounted on the ceiling. s Quick Start Guide
E
Front cover Remove this cover to remove or install the lens unit
when replacing the lens. s
This cover must be installed when using the projector.
F
Remote Receiver Receives signals from the remote control. s Quick
Start Guide
G
Remove this cover to connect cables to the ports inside
Interface cover
when connecting the projector to video equipment.
s Quick Start Guide ,
H
Projection lens Images are projected through here.
I
Interface cover open/ Opens and closes the interface cover. s Quick Start
close switch Guide
J
Attach the optional Ceiling mount here when
Ceiling mount fixing
suspending the projector from a ceiling. s p.68,
points
p.79
(Four points)
9
Function
p.77
p.86
p.10