Settings Menu - Epson EB-Z8000WU User Manual

List of Functions

Settings Menu

Sub Menu
Keystone
Control Panel Lock
Lens Operation Lock
Pointer Shape
Power Consumption
Remote Receiver
User Button
You can correct keystone distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone.
Use the [w/ ], [v/ ], [</ ], and [>/ ] buttons on the control panel to perform similar corrections to V-Keystone and H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. s
You can use this to restrict operation of the projector's Control panel. s
You can use this to restrict the lens operation of the remote control. s
You can select the shape of the pointer. s
Pointer 1: Pointer 2: Pointer 3:
You can set the Lamp brightness to one of two settings.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is
selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and the fan rotation noise during projection is
reduced. Electrical consumption: about 16% decrease, lamp life: about 1.4 times longer
You can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to
deactivate the remote receiver you do not want to use or that is experiencing interference.
You can select the item assigned from the configuration menu with the Remote Control's [User] button. By pressing the [User] button the assigned
menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following six
items to the [User] button.
Power Consumption, Info, Progressive, Test Pattern, Multi-screen, and Resolution
Function
p.15
p.36
p.37
p.27
45