Viper 5301 Owner's Manual page 15

Aux 3
Command
Press three times and then press
:
Feedback
The AUX LED turns on for 3-secs, AUX activation tone
:
sounds.
Notes
This is an optional feature. See your sales rep/installer
:
for details.
Runtime check
Command
Press three-times, and then Hold for 1.5 seconds.
:
Feedback
Remote start On tones sound.
:
Notes
Runtime remaining is displayed as per the LED on the
:
remote. (See page 23). If the remote start is not active
the 2-way responds with an error tone.
Rear defogger
Command
Press four times, and then
:
start is on.)
Feedback
Remote start LED on, 1 beep.
:
Notes
Manually turns on the defogger when remote start is
:
on.
© 2008 Directed Electronics. All rights reserved.
A U X .
. (Only after remote
15