Table of Contents
Advertisement
O
peration
Filling with water
1.
Push down on the safety cap while turning
counter clockwise.
2.
Fill measuring cup to the max fill line.
3.
Slowly pour water into steamer.
4.
Replace the safety cap by pushing down while
turning clockwise.
NOTE: You may substitute distilled or
demineralized water for tap water.
If your tap water contains a high level
of mineral content (hard water) the use
of distilled or demineralized water is
recommended.
Do not add anything except cool water
or you will cause damage to the heating
element and void your warranty.
Power cord
Unwrap power cord before operating unit.
Indicator light
The red indicator light will go on when the unit
is first plugged in. When the steamer is ready to
use, the light will turn off.
Steam trigger
Push to release steam.
w w w . b i s s e l l . c o m
CAUTION:
Always unplug your Steam
Shot before filling/refilling.
Press trigger until Steamer
depressurizes. Wait 5
minutes before removing cap.
1.
3.
CAUTION:
Before disconnecting a tool
from the steam cleaner,
make certain that steam is
no longer coming from the
nozzle. Use an oven mitt to
remove tools, or wait until
they cool before removing.
2.
4.
5
Advertisement
Table of Contents
