Heat Controller HTV Series Installation, Operation & Maintenance Manual page 30

Installation, Operation & Maintenance
CXM Controls
Table 7: Nominal resistance at various temperatures
Resistance
Temp (ºC) Temp (ºF)
(kOhm)
-17.8 0.0 85.34
-17.5 0.5 84.00
-16.9 1.5 81.38
-12 10.4 61.70
-11 12.2 58.40
-10 14.0 55.30
-9 15.8 52.38
-8 17.6 49.64
-7 19.4 47.05
-6 21.2 44.61
-5 23.0 42.32
-4 24.8 40.15
-3 26.6 38.11
-2 28.4 36.18
-1 30.2 34.37
0 32.0 32.65
1 33.8 31.03
2 35.6 29.50
3 37.4 28.05
4 39.2 26.69
5 41.0 25.39
6 42.8 24.17
7 44.6 23.02
8 46.4 21.92
9 48.2 20.88
10 50.0 19.90
11 51.8 18.97
12 53.6 18.09
13 55.4 17.26
14 57.2 16.46
15 59.0 15.71
16 60.8 15.00
17 62.6 14.32
18 64.4 13.68
19 66.2 13.07
20 68.0 12.49
21 69.8 11.94
22 71.6 11.42
23 73.4 10.92
24 75.2 10.45
25 77.0 10.00
26 78.8 9.57
27 80.6 9.16
28 82.4 8.78
29 84.2 8.41
30 86.0 8.06
31 87.8 7.72
32 89.6 7.40
33 91.4 7.10
34 93.2 6.81
35 95.0 6.53
36 96.8 6.27
37 98.6 6.01
38 100.4 5.77
39 102.2 5.54
40 104.0 5.33
41 105.8 5.12
42 107.6 4.92
43 109.4 4.72
44 111.2 4.54
45 113.0 4.37
46 114.8 4.20
47 116.6 4.04
48 118.4 3.89
49 120.2 3.74
50 122.0 3.60
51 123.8 3.47
52 125.6 3.34
53 127.4 3.22
54 129.2 3.10
HTV/HTD/HTH SERIES
Resistance
Temp (ºC) Temp (ºF)
(kOhm)
55 131.0 2.99
56 132.8 2.88
57 134.6 2.77
58 136.4 2.67
59 138.2 2.58
60 140.0 2.49
61 141.8 2.40
62 143.6 2.32
63 145.4 2.23
64 147.2 2.16
65 149.0 2.08
66 150.8 2.01
67 152.6 1.94
68 154.4 1.88
69 156.2 1.81
70 158.0 1.75
71 159.8 1.69
72 161.6 1.64
73 163.4 1.58
74 165.2 1.53
75 167.0 1.48
76 168.8 1.43
77 170.6 1.39
78 172.4 1.34
79 174.2 1.30
80 176.0 1.26
81 177.8 1.22
82 179.6 1.18
83 181.4 1.14
84 183.2 1.10
85 185.0 1.07
86 186.8 1.04
87 188.6 1.01
88 190.4 0.97
89 192.2 0.94
90 194.0 0.92
91 195.8 0.89
92 197.6 0.86
93 199.4 0.84
94 201.2 0.81
95 203.0 0.79
96 204.8 0.76
97 206.6 0.74
98 208.4 0.72
99 210.2 0.70
100 212.0 0.68
101 213.8 0.66
102 215.6 0.64
103 217.4 0.62
104 219.2 0.60
105 221.0 0.59
106 222.8 0.57
107 224.6 0.55
108 226.4 0.54
109 228.2 0.52
110 230.0 0.51
111 231.8 0.50
112 233.6 0.48
113 235.4 0.47
114 237.2 0.46
115 239.0 0.44
116 240.8 0.43
117 242.6 0.42
118 244.4 0.41
119 246.2 0.40
120 248.0 0.39
121 249.8 0.38
122 251.6 0.37
123 253.4 0.36
CXM Thermostat Details
Thermostat Compatibility - Most all heat pump thermostats can
be used with the CXM control. However Heat/Cool stats are
NOT compatible with the CXM.
Anticipation Leakage Current - Maximum leakage current for
"Y" is 50 mA and for "W" is 20mA. Triacs can be used if leakage
current is less than above. Thermostats with anticipators can be
used if anticipation current is less than that specifi ed above.
Thermostat Signals -
• "Y" and "W" have a 1 second recognition time when
being activated or being removed.
• "O" and "G" are direct pass through signals but are
monitored by the micro processor.
• "R" and "C" are from the transformer.
• "AL1" and "AL2" originate from the alarm relay.
• "A" is paralleled with the compressor output for use
with well water solenoid valves.
• The "Y" 1/4" quick connect is a connection point to the
"Y" input terminal P1 for factory use. This "Y" terminal
can be used to drive panel mounted relays such as the
loop pump relay.
30
Heat Controller, Inc.