Frequently Asked Questions - AT&T Elevate 4G User Manual

4: Frequently Asked Questions

This chapter provides answers to questions you may have about your mobile hotspot.
(Also see
What do I do if I forget my Wi-Fi Key or Admin Login?
The Wi-Fi Key appears on the LCD, unless you have configured it not to show.
The default Admin Login (attadmin) is printed on a label under the battery.
If you have changed either of these and then forgotten them:
1. Reset the device to the factory settings. (See
2. Use the default Wi-Fi Key and Admin Login (attadmin) to connect to the Wi-Fi
How do I disconnect from the mobile broadband
network?
Do one of the following:
•
•
I can't see the Connect / Disconnect button on the
homepage.
The Connect / Disconnect button is only visible when you are logged in as
Administrator.
To log in as Administrator:
1. Place your cursor in the Admin Login box on the homepage and type the Admin
2. Click Login.
Rev 1 Aug.11
Troubleshooting on page 49.)
page 51.)
network and log in as Administrator. See
page 13.
On the Mobile Hotspot Homepage, click Disconnect (below the virtual mobile
hotspot).
Press and hold the power button for a few seconds to turn off the mobile hotspot.
Login (attadmin).
Reset the Mobile Hotspot
Set Up and Connect to the Internet
4
on
on
46