Set Up And Connect To The Internet; Connect To The Internet - AT&T Elevate 4G User Manual

Rev 1 Aug.11

Set Up and Connect to the Internet

Install the Battery
1. Insert the battery as shown in the illustration. Ensure that the gold contacts
on the battery are lined up with the gold contacts on the device.
Battery
2. Replace the back cover.
Note: The battery comes partially-charged and ready to go. You do not need to charge it
fully unless you wish to. When the battery needs recharge, follow the instructions in
Recharge the Battery on page 30.

Connect to the Internet

Note: Your mobile hotspot does not need to be connected to the computer with the USB
cable to connect to the Internet. The USB cable is used mainly for recharging the battery.
(You can also connect to the Internet with the mobile hotspot tethered to the laptop with the
USB cable.)
To connect to the Internet:
1. Turn on the mobile hotspot.
Press and hold the power button for a few seconds.
The first time you connect a computer to the mobile hotspot network, the LCD
screen displays the message "Connect your computer to Wi-Fi network". The
Wi-Fi SSID (Network Name) and the Wi-Fi Key are shown on the LCD screen.
Gold contacts
Default
security credentials
Get Started
13