Device Setup And Power On; Connect To Your At&T Mobile Hotspot Mifi Liberate - AT&T MiFi Liberate User Manual

Device Setup and Power On

Your MiFi Liberate comes with the SIM card and battery already installed. Remove the battery pull-
tab prior to use.
➊
Press and release the power button. When the touchscreen displays the interactive icons,
your device is ready to use.
➋
To lock the touchscreen, press and release the power button. To unlock, press and release
the power button and slide the lock tab.
➌
To power off the device, press and hold the power button for 3 seconds to display the Shut
Down window, then tap Yes.
Connect to Your AT&T Mobile Hotspot MiFi Liberate
You can connect up to 10 compatible Wi-Fi enabled devices. To connect wireless devices
(computers, tablets, e-readers, cameras, media players, smartphones, etc.):
➊
Open the Wi-Fi menu on the device you would like to connect and view the list of available
networks.
➋
Select your MiFi Liberate Wi-Fi Network Name (SSID) (e.g., MIFI-LIBERATE-XXXX).
➌
Select Connect and enter the Wi-Fi password displayed under Connection Details on the MiFi
Liberate. Your device should automatically connect to the AT&T network.
➍
After you connect your computer to your MiFi Liberate using Wi-Fi, you can access the
MiFi Liberate Manager web interface to customize settings, change your password, access
applications and more. Browse to (http://att.mifiliberate), and use the default password to
log in, attadmin. (See
➎
Configure security for your MiFi Liberate. (See
Log into the MiFi Liberate Manager Web Interface
Configure Security
7
on page 21.)
on page 23.)