Battery Usage; Charge The Battery - AT&T MiFi Liberate User Manual

Battery Usage

Charge the Battery

The MiFi Liberate comes with the SIM card and battery installed. Remove the battery pull tab prior
to use.
To charge the battery, connect the A/C charger to the USB cable and plug into the MiFi Liberate's
micro USB port. The charging battery status icon
status bar while the battery is charging. When the battery is fully charged, the message "Battery
is fully charged, please disconnect power." displays on the touchscreen. When disconnected from
power and fully charged, the battery status icon displays fully charged
IMPORTANT
The battery door cover on your MiFi Liberate device lifts off to open and snaps
on to close. No tools are required to remove or install the battery or battery door. Using any
type of tool could result in damage to the device and to the battery. If excessive force appears
necessary to move the door or remove the battery, please return the MiFi Liberate to where you
purchased the device.
displays on the MiFi Liberate touchscreen
14
.