Remove And Replace The Color Wheel Shield - InFocus X1 Service Manual

Remove and Replace the Color Wheel Shield

The color wheel shield (330-0968-xx) fastens to the lamphouse and the optical engine. The shield
provides protection to the fragile color wheel and bracing for the lamphouse which is otherwise open to
the optical engine.
1. Remove the following items:
Lamp module (page 42)
Focus ring (page 30)
Zoom ring (page 30)
Front bezel (page 32)
Rear bezel (page 49)
Top case (page 52)
2. Remove the two M3x10 Plastite Phillips screws that fasten the color wheel shield to the top of
the lamphouse and the optical engine.
X1 Service Guide 17